Frequently asked questions

What is the difference between mirror tile and glass tile?

Mirror tile has a reflective metallic backing that bounces light and makes a small wall read as larger; glass tile is coloured or clear through the body and reflects light more softly. Mirror tile is the stronger choice for a feature wall or a narrow kitchen, while glass tile suits backsplashes where you want colour and depth without a mirror effect.

What is the difference between glass subway tile and ceramic subway tile?

Glass subway tile has a non-porous surface, so it does not absorb water and does not stain along the grout line the way a porous ceramic tile can. Ceramic is usually more economical and gives a solid matte or gloss finish, while glass gives a brighter, more reflective surface with colour that shifts in the light.

Do I need a wet saw to cut glass mosaic tile?

No. Self-adhesive glass mosaic and subway sheets are cut with a utility knife, scoring the face against a straight edge and snapping, or with tile nippers for outlet cutouts. Keep the adhesive liner in place while cutting so the mesh grid holds the small pieces together.

Do I need to grout glass mosaic tile sheets?

No grout is needed. The mesh-backed sheets are made to butt together, with the grout line already printed into the mesh, so the joint line appears without any grouting step.

Can I install this tile in a rental apartment?

Yes, and it is one of the most common reasons customers choose peel and stick tile. Installation needs no mortar or grout, and the tile is removable by design, so you can restore the wall when you move out.

What should I do if my peel and stick tile starts to lift or fall off?

Lifting almost always traces back to the surface. Press the lifted area back down after warming it briefly with a hair dryer. If it lifts again, remove that sheet, clean the wall of dust or grease, confirm the paint is not peeling or glossy, and reapply. Avoid installing over freshly painted or textured walls.

How do I remove the tile without damaging the drywall?

Warm the tile with a hair dryer to soften the adhesive, slide a plastic scraper under one corner, and peel slowly at a low angle rather than pulling straight out. Any residue is best cleaned with a mild adhesive remover. Taking it slowly is what protects the drywall and the paint underneath.

How do I calculate how many sheets I need?

Measure the area in inches, multiply length by height, and divide by 144 to get square feet. Subtract roughly 10 percent for outlets, windows and trim, then add 10 to 15 percent for cuts. Each product page lists the coverage per pack, so divide your total square footage by that number and round up.

What is the best way to clean a glass tile backsplash without streaks?

Wipe with a soft cloth and a mild pH-neutral cleaner or a diluted dish soap solution, then dry with a separate clean microfiber cloth. The second dry cloth is what removes streaks. Avoid abrasive pads, ammonia-based glass cleaners and acidic descalers on the grout lines.

Why buy directly from LovDeco instead of a marketplace listing?

Buying direct gives you a single production lot, so the finish matches across packs, plus installation support from the people who know how the tile performs in a specific room. Marketplaces are strong on price and delivery speed; buy direct when consistency and product support matter more.