Peel And Stick Silver Beveled Mirror Glass Tile, Strip, 12*12 Inches, Glossy, MT1

Size: 12 x 12 x 0.24 Inch (300 x 300 x 6mm), 5 sheets/box, totally 5 sq.ft.
Easy to Install: This peel and stick glass tiles are easy to install for beginners and professionals
Wide Application: Strip mirror with ice crack silver glass tile is a wise choice for wall decoration, kitchen backsplash, bathroom, etc.
Durable Tile: 5mm mirror tile is 20% thicker than other mirrors. Waterproof and fire resistance make our beveled mirror glass mosaic safer than other materials
Perfect Packaging: Each piece of tile will be wrapped tightly with EPE foam and placed in a carton box to protect tiles during shipping

Installation:

1. Surfaces

Recommended Surfaces: Smooth glass wall/Melamine surface/painted gypsum/acrylic wall panel/smooth ceramic tile/stainless steel plate/aluminum plate surface

Non Recommended Surfaces: Oiled wall/popcorn wall/brick wall/stone wall/stucco wall/orange peel wall

Tips: You may need additional adhesive (construction adhesive) when installing on textured surfaces or sand the texture first to make it as flat as possible to increase the contact area of the backsplash for best results.

2. Additional Construction Adhesive: Please make sure to use a tile-specific adhesive, and avoid glues like Liquid Nails that are not intended for installations.

3. Cutting: wet saw: tiling a large area that requires many straight cuts; manual scoring wheel/bar cutter: conventional cutter tools; wheeled mosaic nippers: cut small, irregularly shaped pieces of glass/mirror tile.

4. Remove: It can't be guaranteed to tear clean, because the adhesive is really strong. Please confirm the paving location before peel and stick.

Maintenance:

For normal care and maintenance：

1. If the mirror tiles are not too dirty, just clean the mirror tile surface with warm water on a lint-free cloth.

2. Using vinegar mixed with water, spray the solution in a clean, lint-free cloth and wipe the tiles. Dry them with another clean cloth.

3. When it comes to mirror tiles in a bathroom if you want to keep them steam-free, apply a thin layer of shaving foam on the surface then wipe it dry with a lint-free cloth.

For nasty marks: Using rubbing alcohol, put some on a cotton pad and rub the spots off.

Tips:

1. Do not use harsh chemicals such as bleach as these can damage the glass of mirror tiles. In some cases, chemicals can also make the tiles look hazy.

2. Please keep the wall dry to ensure the long-term use of peel-and-stick tiles.